The SNC100C-A0 integrated navigation system is equipped with high-performance MEMS gyroscopes and accelerometers, capable of receiving internal GNSS data to achieve multi-sensor fusion and integrated navigation calculation algorithms. It has short-term inertial navigation capability when GNSS is unavailable. This product is highly reliable and has strong environmental adaptability. By matching different software, it can be widely used in industry drone systems.

Indicator parameters ：

System Performance Indicators

Test Conditions Indicators
GNS5 available, single point 1.2m(RMS)
GNS5 available, RTK 2cm+1ppm(RMS)
Position hold, GNS5 failure 20m/60s
2%D, D is travel distance (optional, odometer combination)
Single GNS5 0.2° (maneuver required)
Dual GNS5 0.1° (two-meter baseline)
Heading hold 0.2°/min (RMS)
GNS5 available 0.1m/s (RMS)
Attitude hold 0.2°/min (RMS)
GNS5 available, single point L/L2 0.1m/s (RMS)
Inertial/odometer combination 0.1m/s (RMS)

Physical Dimensions and Electrical Characteristics

Voltage 9-36V DC
Power consumption ≤3W
Dimensions 80mm×53mm×23mm
Weight ≤150g

Environmental Indicators

Operating temperature -40°~+60°
Storage temperature -45°~+70°
Vibration 20~2000Hz,6.06g
Shock 30g,1fms
MTBF >30000h
Continuous operation time >24h

System Performance Indicators

Measurement range ±450°/s
Gyroscope ≤2°/h (10s average)
Acceleration ±16g
Meter ≤30μg@Allan

Interface Characteristics

Rs422x1
Rs232x1
CAN
EVENT input
PPS input
Odometer differential input