M710 is an IMU module with built-in MEMS that uses full-temperature calibration compensation, ensuring stable performance in complex temperature environments; the GNSS module adopts a multi-frequency high-precision positioning orientation board for the entire system, effectively enhancing system accuracy. The product features raw data output, which, when combined with post-processing software, can meet the application needs in the surveying field.
Indicator parameters:
| System indicators
| |
| Navigation accuracy
| ≤0.1° (RMS, dual antenna 2-meter baseline) |
| Pose accuracy
| ≤0.1°(RMS) |
| Position Accuracy
| Satellite combination ≤1.2m (single point positioning, RMS)
|
| RTK accuracy ≤2cm 1ppm
| |
| Speed and accuracy
| ≤0.02m/s(卫星组合,RMS) |
| Start time
| ≤5s |
| Align the time
| ≤1 minute (dual-antenna satellite assistance)
|
| Data update rate
| 0.1Hz-100Hz
|
| Device specifications
| |
| Gyroscope
| Mileage ±500°/s zero bias stability ≤30°/h (1σ, 10s at room temperature) |
| Range ±500°/s Zero bias stability ≤30°/h (1σ, 10s at room temperature)
| Range ±5g zero offset stability less than or equal to 1mg (1σ, 10s at room temperature)
|
| Physical persistence
| |
| Supply voltage
| 18-36V(DC) |
| Operating Temperature
| -40℃~85℃ |
| Storage Temperature
| -45℃~90℃ |
| Dimensions
| 76x64x18(mm) |
| Power Consumption
| ≤5W |
| Material
| Aluminum Alloy |
| Protection Rating
| IP65 |
| Weight
| ≤120g |
| Shock & Vibration
| Meets requirements of GJB150.16A-2009, GJB150.18A-2009 |
Interface Characteristics | |
| Interface Type
| 3xRS232，2xRS422，1XPPS |
| Baud Rate / Transmission Rate
|
|
Long Press to Scan QR Code
Scan QR Code
